 |
 |
|
 PRODUCTS
|
[nomex paper, mould laminated, glass cloth laminated]
As a professional nomex papers, mould laminateds, glass cloth laminateds manufacturer, exporter, supplier and factory in China.--Ningbo Omen Industrial Co., Ltd. was established on 1996, We are a professional Manufacturer of Irrigation Products, nomex paper, mould laminated, glass cloth laminated, Thermal insulations, Seals, ELECTRIAL SULATION material, Plastic, Aluminum and Glass packaging. As a mutual group enterprise, our company owned 10 different productiondepartments, 120 professional technicians and 1500 employees at present.
|
 |
| 6050 Polyimide film |
|
We can, therefore, guarantee to provide our customers with competitiveprices, prompt delivery and different products. Most of our products, nomex papers, mould laminateds, glass cloth laminateds are widely distributed to more than 70 countries &. Areas.
|
| 6050 Polyimide film
Composition: Polyimide resin
Characteristics & application: Excellent heat and cold resistances, radiation,water, acid and freon resistances, used as class H insulation for electric machinery and appliance.
Temperature classification: Class H
Implemented standard: JB 2726-80
• polyimide film £¨ CENPI )£º 25-125 um thickness is available.
• Polyimide film coated with FEP £¨ CENFPI )
PI film thickness £º 25um or 30 um Coating thickness £º 12.5um or 10um
3. Polyimide film coated with silicone adhesive £¨ CENSPI )
PI film thickness £º 25um or 50 um Coating thickness £º 35um
4. Polyimide film sputtered with copper £¨ CENCPI )
PI film thickness £º 25um or 50 um Coating thickness £º 20nm-100nm
5. Two layers adhesiveless polyimide copper clad laminate
6. ITO transparent condutor film
7. PET film sputtered with copper
8. Other polyimide eated products
thickness
item |
25um |
50um |
75um |
100um |
125um |
150um |
175um |
Testing standard |
Thickness tolerance £¨ um ) |
¡À 3 |
¡À 3 |
¡À 5 |
¡À 6 |
¡À 8 |
¡À 10 |
¡À 12 |
JB/2726-1996 |
Tensile strength
£¨ Mpa ) |
MD |
>= 150 |
>= 145 |
>= 140 |
>= 135 |
>= 130 |
>= 125 |
>= 120 |
ASTMD-882 |
TD |
>= 145 |
>= 135 |
>= 130 |
>= 125 |
>= 120 |
>= 115 |
>= 110 |
ASTMD-882 |
Elongation breaking
£¨ % ) |
MD |
>= 55 |
>= 60 |
>= 65 |
>= 70 |
>= 75 |
>= 80 |
>= 85 |
ASTMD-882 |
TD |
>= 55 |
>= 60 |
>= 65 |
>= 70 |
>= 75 |
>= 80 |
>= 85 |
ASTMD-882 |
Shrinkage £¨ % ) 250 oC |
<= 0.30 |
<= 0.28 |
<= 0.26 |
<= 0.24 |
<= 0.22 |
<= 0.20 |
<= 0.20 |
ASTMD-1024 |
breakdown voltage £¨ MV/m ) |
>= 200 |
>= 180 |
>= 160 |
>= 140 |
>= 130 |
>= 120 |
>= 110 |
ASTMD-1-49 |
Surface resistivity £¨¦¸) |
>= 1*10 15 |
>= 8*10 14 |
>= 5*10 14 |
>= 1*10 14 |
>= 1*10 14 |
>= 5*10 13 |
>= 5*10 13 |
ASTMD-257 |
Volume resistivity £¨¦¸ cm ) |
>= 1*10 18 |
>= 8*10 17 |
>= 5*10 17 |
>= 1*10 17 |
>= 1*10 17 |
>= 5*10 16 |
>= 5*10 16 |
ASTMD-257 |
Relative permittivity1KHz |
<= 3.5 |
<= 3.6 |
<= 3.7 |
<= 3.7 |
<= 3.7 |
<= 3.8 |
<= 3.8 |
ASTMD-150 |
Dissipation factor of medium 1KHz |
<= 0.0025 |
<= 0.0025 |
<= 0.0025 |
<= 0.0025 |
<= 0.0027 |
<= 0.0030 |
<= 0.0030 |
ASTMD-250 |
Specification |
Unit |
Index values |
Density |
g/cm3 |
¡Ý1.4 |
Tensile strength |
Mpa |
¡Ý100 |
Extension rate |
% |
¡Ý25(Longitudinal)
¡Ý20(Latitudinal) |
Volume resistivity |
M¦¸.m |
¡Ý1.0¡Á107(20¡æ) ¡Ý1.0¡Á104(200¡æ) |
Relative permittivity(103Hz) |
|
¡Ü4(Power frequency) |
Dissipation factor
of medium |
Power frequency |
¡¡ |
¡Ü0.01 |
1000Hz |
¡¡ |
-- |
Dielectric strength |
V/¦Ìm |
¡Ý100(60)(20¡À5¡æ)
¡Ý80(48)(200¡æ) |
|
 |
| SMC MOULD LAMINATED PRODUCTS |
|
SMC MOULD LAMINATED PRODUCTS
These series of products are sheet mould plastic that are made from unsaturated polyester glass fibre and many kinds of supporting materials. It has excellent moulding technices, low plastic shrinkage, excellent insulating/mecjanical flame-retarding size stability properties. It can be used as insulating components of high voltage or low voltage electric appliances. |
 |
| 3250 Silicone glass cloth laminated sheet |
|
It is created from electrical glass cloth with alkali-free that has been impregnated with silicone resin under pressure. heat and rolling. The thermal grade is class H insulation. With excellent mechanical strength and dielectric property, wet-resistant . Used for the insulating slots. windings. gaskets. junction board of the dry-type transformer/railway transformer/electrical equipment/traction motor etc.
Sheets: Thickness0.5-200mm Size:1000X2000mm
Technical data
No Specification Unit Index
1 Water absorption 0.4-12mm mg 28-85
2 Flexural strength perpendicular to lamination Mpa >= 119.6
3 Notch impact strength parallel to KJ/ M2 >= 24.9
lamination charpy
4 Electrical strength parallel to lamination KV 25
in transformer oil 90 +- 2 oC (1min)
5 5Insulation resistivity parallel to M ¦¸ >= 1X10 2
lamination after wet
6 Dissipation factor 1MHZ after wet <= 0.07
7 Permittivity at 1MHZ after wet <= 6
|
| |
|
|
|
|
 |
 PRODUCTS LIST
 Sealing and gasket, Thermal insulation
Electrial insulations
IRRIGATION
LAWN & GARDEN
|
 |
|
|
Contact person:Mr. Sunne Feng Email: sales@omenco.com
Phone : +86-574-88183823,83030723,83036723 Fax : +86-574-56664782, 83030721 Mobile : +86-13566061608
Address :3F, A7 Building,Waiduan Industrial Zone, Siming East Road, Yinzhou , Ningbo, China. 315100
All Rights Reserved. Designed By Haibo Network Inc. Powered By HiSupplier.com Online Inc.
|
|
 |
|
