 |
 |
|
 PRODUCTS
|
[BMI glass cloth laminated, epoxy pre-impregnated DMD laminate, fiberglass tension and drawn component]
As a professional BMI glass cloth laminateds, epoxy pre-impregnated DMD laminates, fiberglass tension and drawn components manufacturer, exporter, supplier and factory in China.--Ningbo Omen Industrial Co., Ltd. was established on 1996, We are a professional Manufacturer of Irrigation Products, BMI glass cloth laminated, epoxy pre-impregnated DMD laminate, fiberglass tension and drawn component, Thermal insulations, Seals, ELECTRIAL SULATION material, Plastic, Aluminum and Glass packaging. As a mutual group enterprise, our company owned 10 different productiondepartments, 120 professional technicians and 1500 employees at present.
|
 |
| 9334 BMI glass cloth laminated sheet |
|
We can, therefore, guarantee to provide our customers with competitiveprices, prompt delivery and different products. Most of our products, BMI glass cloth laminateds, epoxy pre-impregnated DMD laminates, fiberglass tension and drawn components are widely distributed to more than 70 countries &. Areas.
|
It is created from electrical glass cloth with alkali-free that has been impregnated with BMI resin under pressure. heat and rolling. The thermal grade is class H insulation. With excellent mechanical strength and dielectric property, radiation-proof. Used for the insulating slots. windings. gaskets. junction board of the dry-type transformer/mine transformer/railway transformer/electrical equipment/traction motor etc.
Sheets: thickness 0.5-200mm size:1000X2000mm
Technical data
No Specification Unit Index
1 Density g/cm2 >= 1.80
2 Marin temperature, lengthwise oC >= 280
3 Flexural strength, At room temperature Mpa >= 343.1
lengthwise 180 oC >= 176.5
4 Bonding strength N >= 4900
5 Impact strength, lengthwise KJ/ M2 >= 147
Surface At room temperature >= 1.0X10 6
6 resistively After wet M ¦¸ m >= 1.0X10 4
180 oC >= 1.0X10 4
At room temperature >= 1.0X10 5
7 Volume resistively After wet M ¦¸ m >= 1.0X10 3
180 oC >= 1.0X10 3
8 Dissipation factor <= 0.05
Electrical strength perpendicular 0.5-1mm >= 22
9 to lamination in transformer oil at 1.2-2mm MV/m >= 20
90 oC 2.1-3mm >= 18
10 Insulation resistivity para At room
llel to lamination temperature >= M ¦¸ >= 1.0X10 4
After wet >= 1.0X10 2
11 Breakdown voltage parallel to lamination in KV >= 30
transformer oil at 90 oC+- 2 oC
|
|
 |
| 810/840/851 Fiberglass tension and drawn components |
|
It composed of glass cloth with alkali-free that is impregnated with thermosetting resins under tensile and drawn. The thermal insulation is class H up to Class B, F, H, C with excellent electrical property and mechnical strenth. Used for the insulating slot/liner/gasket of the high voltage switch. dry-type transformer. mine transformer. railway transformer. motor. communication and electrical equipment etc. We also can produce the sample according to your special needs.
1 Density: >= 1.8 -- 2.0(g/cm3)
2 Heat Deflection Temperaure:180/200/240 oC
3 Impact strength: >= 90KJ/ M2
4 Flexural strength: >= 390N/m M2
5 Water absorption: <= 20mg
6 Insulation resistance: >= 1.0X1013 ¦¸
7 Dielectric breakdown strength(90 oC at oil): >= 10MV/m
8 Proof tracking index(PTI): >= 600V
9 Flammability level: FVO
10 Heat resistance for long rime(TI):155/180/220 oC
|
|
| |
|
|
|
|
 |
 PRODUCTS LIST
 Sealing and gasket, Thermal insulation
Electrial insulations
IRRIGATION
LAWN & GARDEN
|
 |
|
|
Contact person:Mr. Sunne Feng Email: sales@omenco.com
Phone : +86-574-88183823,83030723,83036723 Fax : +86-574-56664782, 83030721 Mobile : +86-13566061608
Address :3F, A7 Building,Waiduan Industrial Zone, Siming East Road, Yinzhou , Ningbo, China. 315100
All Rights Reserved. Designed By Haibo Network Inc. Powered By HiSupplier.com Online Inc.
|
|
 |
|
